Filter cartridge heater element Mica Band Heater UL certificate
Tutco offers a variety of band heaters to accommodate any cylindrical application. Tutco's product offering ranges from the HT Mica Band using high temperature mica and sheath materials for your high temperature applications, to the better belly band used for compressor applications.
Technical Detail:
| Voltage |
12~440V |
| Wattage |
Max. 3.5w/cm2 |
| Min. Dimension(ID*height) |
25*20mm |
| Electric Heating Wire |
NiCr2080 |
| Insulation |
Mica |
| Sheath |
Stainless steel |
| Operation Temperature |
0~350℃ |
| |
|
Typical Application:
- Plastic Injection Molding Machines
- Plastic Extruders
- Oil Reclamation Equipment
- Food and Candy Extruders
- Drum Heating
- Extrusion Dies
- Holding Tanks
- Blow Molding Machines
- Vending Machines
- Food Service Warming
- Autoclaves & Sterilizers
- Metallurgical Analyzers
- Fluidized Beds
Why TUTCO
1. Heater is UL listed for Outdoor Applications
2. All of the limit controls in all TUTCO duct heaters are
automatic resets or are manually resettable. There are
no devices that have to be replaced when tripped.
3. In a horizontal airflow application, the airflow direction is not specific; it can go either direction without any modification.
4. With our wire rack element suspension system, the heater
coil is less susceptible to airflow shading and allows a very small pressure drop across the coils.
5. All TUTCO duct heaters carry a zero clearance rating for installations into ducts.
